Site Logo
Looking for girlfriend > 50 years > Solaris 10 find man page

Solaris 10 find man page

Site Logo

The C shell, the Korn shell, and the Bourne shell all have echo built-in commands, which, by default, is invoked if the user calls echo without a full pathname. In addition, ksh 's echo does not have an -n option. A string to be written to standard output. The following character sequences is recognized within any of the arguments:. Print line without new-line.

SEE VIDEO BY TOPIC: Solaris 10 Basic Commands: Part 2

Content:
SEE VIDEO BY TOPIC: #12 Sun: Static Network Settings on Solaris

FreeBSD Manual Pages

Site Logo

Want to link to this manual page? Skip site navigation 1 Skip section navigation 2 Header And Logo. Peripheral Links. Donate to FreeBSD. An open file may be a regular file, a directory, a block special file, a character special file, an executing text reference, a library, a stream or a network file Internet socket, NFS file or UNIX domain socket. A specific file or all the files in a file system may be se- lected by path. Instead of a formatted display, lsof will produce output that can be parsed by other programs.

In addition to producing a single output list, lsof will run in repeat mode. In repeat mode it will produce output, delay, then repeat the output operation until stopped with an interrupt or quit signal.

If any list request option is specified, other list requests must be specifically requested - e. Normally list options that are specifically stated are ORed - i. Since they represent exclusions, they are applied without ORing or AND- ing and take effect before any other selection criteria are applied. The -a option may be used to AND the selections. Caution: the -a option causes all list selection options to be ANDed; it can't be used to cause ANDing of selected pairs of selection options by placing it between them, even though its placement there is accept- able.

Wherever -a is placed, it causes the ANDing of all selection op- tions. Items of the same selection set - command names, file descriptors, net- work addresses, process identifiers, user identifiers, zone names, se- curity contexts - are joined in a single ORed set and applied before the result participates in ANDing. Thus, for example, specifying -i aaa.

Options may be grouped together following a single prefix -- e. For example, -Fn might represent the -F and -n options, or it might represent the n field identifier character fol- lowing the -F option. Options that don't take on separate meanings for each prefix - e. Be careful of prefix grouping when one or more options in the group does take on separate meanings under different prefixes - e.

When in doubt, use separate options with appropriate prefixes. Lsof displays a shortened form of this output when it detects an error in the options supplied to it, after it has displayed messages explaining each error. It allows the lsof user to specify A as an alternate name list file where the kernel addresses of the dynamic modules might be found.

Multiple commands may be specified, using multiple -c options. Shell meta-characters in the regular expression must be quoted to prevent their interpretation by the shell. The closing slash may be followed by these modifiers: b the regular expression is a basic one. The simple command specification is tested first.

If that test fails, the command regular expression is applied. If the simple command test succeeds, the command regular expression test isn't made. The lsof default is nine. Note that many UNIX dialects do not supply all command name characters to lsof in the files and structures from which lsof obtains command name. Often dialects limit the number of characters supplied in those sources. For example, Linux 2.

If w is zero '0' , all command characters supplied to lsof by the UNIX dialect will be printed. Nor does it search for open files on file system mount points on subdirectories of s unless the -x or -x f option is also specified. Note: the authority of the user of this option limits it to searching for files that the user has permission to examine with the system stat 2 function.

The file descriptors are spec- ified in the comma-separated set s - e. There should be no spaces in the set. Mixed lists are not permitted. A file descriptor number range may be in the set as long as neither member is empty, both members are numbers, and the ending member is larger than the starting one - e.

Multiple file descriptor numbers are joined in a single ORed set before participating in AND option selection. When there are exclusion and inclusion members in the set, lsof reports them as errors and exits with a non-zero return code. Nor does it search for open files on file system mount points on subdirectories of D unless the -x or -x f option is also specified.

Further note: lsof may process this option slowly and require a large amount of dynamic memory to do it. This is because it must descend the entire directory tree, rooted at D , calling stat 2 for each file and directory, building a list of all the files it finds, and searching that list for a match with every open file.

When directory D is large, these steps can take a long time, so use this option prudently. The use of this option is sometimes restricted. Lsof recognizes these function letters:? When these functions are restricted, they will not appear in the description of the -D option that accompanies -h or -? When available, the b , r , and u functions may be followed by the device cache file's path.

The standard default is. The output of the -h and -? The suffix, hostname , is the first component of the host's name returned by gethostname 2. When available, the b function directs lsof to build a new de- vice cache file at the default or specified path. The i function directs lsof to ignore the default device cache file and obtain its information about devices via direct calls to the kernel. The r function directs lsof to read the device cache at the default or specified path, but prevents it from creating a new device cache file when none exists or the existing one is im- properly structured.

The r function, when specified without a path name, prevents lsof from updating an incorrect or out- dated device cache file, or creating a new one in its place. The r function is always available when it is specified with- out a path name argument; it may be restricted by the permis- sions of the lsof process. When available, the u function directs lsof to read the device cache file at the default or specified path, if possible, and to rebuild it, if necessary.

This is the default device cache file function when no -D option has been specified. The -e option exempts only stat 2 and lstat 2 kernel function calls.

This option is currently implemented only for Linux. CAUTION: this option can easily be mis-applied to other than the file system of interest, because it uses path name rather than the more reliable device and inode numbers. Use this option with great care and fully specify the path name of the file system to be exempted. When open files on exempted file systems are reported, it may not be possible to obtain all their information.

Multiple occurrences of this information can appear in a file's NAME column. Normally a path name argument is taken to be a file system name if it matches a mounted-on directory name reported by mount 8 , or if it represents a block device, named in the mount output and associated with a mounted directory name.

This can be useful, for example, when the file system name mounted-on device isn't a block device. When -f is specified by itself, all path name arguments will be taken to be simple files. File structure addresses, use counts, flags, and node ad- dresses may be used to detect more readily identical files in- herited by child processes and identical files in use by dif- ferent processes.

Lsof column output can be sorted by output columns holding the values and listed to identify identical file use, or lsof field output can be parsed by an AWK or Perl post-filter script, or by a C program. Each field to be output is specified with a single character in f. When the field selection character list is empty, all standard fields are selected except the raw device field, security context and zone field for compatibility reasons and the NL field terminator is used.

When a field selection character identifies an item lsof does not normally list - e. The -g option also enables the output display of PGID numbers. When specified without a PGID set that's all it does. If no address is speci- fied, this option selects the listing of all Internet and x. If -i 4 or -i 6 is specified with no following address, only files of the indicated IP version, IPv4 or IPv6, are dis- played. Sequentially specifying -i 4, followed by -i 6 is the same as specifying -i , and vice-versa.

Specifying -i 4, or -i 6 after -i is the same as specifying -i 4 or -i 6 by itself. Multiple addresses up to a limit of may be specified with multiple -i options. A port number or service name range is counted as one address.

An Internet address is specified in the form Items in square brackets are optional. If neither '4' nor '6' is specified, the following address applies to all IP versions.

Unless a specific IP version is specified, open network files associated with host names of all versions will be selected. When an IP version is selected, only its numeric addresses may be specified. To see if the dialect supports IPv6, run lsof and spec- ify the -h or -? IPv4 host names and addresses may not be specified if network file selection is limited to IPv6 with -i 6.

IPv6 host names and addresses may not be specified if network file selection is limited to IPv4 with -i 4. When an open IPv4 network file's address is mapped in an IPv6 address, the open file's type will be IPv6, not IPv4, and its display will be selected by '6', not '4'. At least one address component - 4, 6, protocol , hostname , hostaddr , or service - must be supplied. Specify either hostname or hostaddr. Specify either service name list or port number list.

Use any case - lower or upper - for protocol. Service names and port numbers may be combined in a list whose entries are separated by commas and whose numeric range en- tries are separated by minus signs. There may be no embedded spaces, and all service names must belong to the specified protocol.

Since service names may contain embedded minus signs, the starting entry of a range can't be a service name; it can be a port number, however. If help output - i.

Solaris 11 : How to monitor network traffic using “ipstat”, “tcpstat” and “netstat” commands

By using our site, you acknowledge that you have read and understand our Cookie Policy , Privacy Policy , and our Terms of Service. Super User is a question and answer site for computer enthusiasts and power users. It only takes a minute to sign up.

The Solaris OS has a long history of innovation, and the Solaris 10 OS is a watershed release that includes features such as. It is a practical guide to deploying and managing the Solaris 10 operating system in a business or academic environment. The book is easy to read and rich with examples—a perfect companion for system administrators who are deploying the Solaris OS for the first time.

Want to link to this manual page? Skip site navigation 1 Skip section navigation 2 Header And Logo. Peripheral Links. Donate to FreeBSD.

Subscribe to RSS

Check here to start a new keyword search. Search support or find a product: Search. Search results are not available at this time. Please try again later or use one of the other support options on this page. Watson Product Search Search. None of the above, continue with my search. How do you configure the Solaris snoop utility to capture network traffic in order to troubleshoot IBM Rational product performance problems? The snoop utility is designed to capture network packets.

perlsolaris(1) - Linux man page

By using our site, you acknowledge that you have read and understand our Cookie Policy , Privacy Policy , and our Terms of Service. It only takes a minute to sign up. Despite this, I can use the man command to view most man pages as usual. However man can no longer find pages for bash , cp or any other standard command.

The find utility recursively descends the directory hierarchy for each path seeking files that match a Boolean expression written in the primaries specified below.

I am facing an issue with stat command. Please suggest. If manual entry is there for any particular command that means command is installed and need to know the path details?

solaris - df (1)

Search a folder hierarchy for filename s that meet a desired criteria: Name, Size, File Type - see examples. GNU find searches the directory tree rooted at each given file name by evaluating the given expression from left to right, according to the rules of precedence see Operators , until the outcome is known the left hand side is false for AND operations, true for OR , at which point find moves on to the next file name. The -H, -L and -P options control the treatment of symbolic links.

Today's Posts. Quick Links. Search Forums. Show Threads. Show Posts. Solaris 10 man pages.

Today's Posts. Quick Links. Search Forums. Show Threads. Show Posts.

Aug 15, - Solaris 10's default MANPATH is /usr/share/man. You can add values to it: MANPATH="/usr/share/man:/opt/sfw/man". See the man page for  Why does Solaris 10 find / -exec sh -c "echo {}" \; print.

In computing , ls is a command to list computer files in Unix and Unix-like operating systems. When invoked without any arguments, ls lists the files in the current working directory. The command is also available in the EFI shell. Today, the two popular versions of ls are the one provided with the GNU coreutils package, and that released by various BSD variants.

.

.

.

.

.

.

Comments: 4
  1. Mazushakar

    Now all became clear to me, I thank for the help in this question.

  2. Zulkikus

    Excuse for that I interfere … To me this situation is familiar. I invite to discussion. Write here or in PM.

  3. Shakasa

    I advise to you to try to look in google.com

  4. Grojin

    In my opinion you are mistaken. Let's discuss it. Write to me in PM.

Thanks! Your comment will appear after verification.
Add a comment

© 2020 Online - Advisor on specific issues.